Eiffel HiPower Hyd HVI ZF 46

Items: 0

Total: $0.00

Eiffel HiPower Hyd HVI ZF range of lubricants are high viscosity index Zinc Free Ashless anti-wear hydraulic fluids formulated with high quality HVI base stocks and advanced very low ash anti-wear additive technology. They are designed to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under severe conditions. These oils are available in ISO viscosity grades from 15 to 150. Moreover, they are also designed to work in systems where high hydrolytic stability is required, even in presence of high moisture content in hydraulic systems.

• Very high viscosity index and excellent shear stability, ensures long pump life under extreme conditions. • Excellent demulsibility property of oil protects hydraulic systems from small quantities of moisture and also separates readily from larger quantities of water. • Excellent anti-wear properties and outstanding film strength provides exceptional equipment protection, that not only results in fewer breakdowns but also helps improve production efficiency. • Excellent protection from rust and corrosion of multi-metallurgy system components, especially in Hydraulic systems with Silver (Ag) components. • Good anti-foam and air release characteristics, designed by using silicon free additive components

These HVI ZF oils are designed for use in Hydraulic applications subjected to wide temperature variations. • Suitable for use in hydraulics of Marine, Industrial & Earth moving; where temperatures vary seasonally. • Applications where HVI anti-wear lubricant is required: servicing gears & bearings, air compressors etc.,

Specifications Eiffel HiPower Hyd HVI ZF series meets or exceeds following International and Builder specifications:

  • DIN 51524 Part 3 HVLP type
  • ISO 6743/4 HV
  • Denison HF-0, HF-2 (T6H20C)
  • VICKERS M-2950S, -I-286
  • Cincinnati Machine P68, P69, P70
  • VICKERS 35VQ25, 104C

Typical Characteristics

Eiffel HiPower Hyd HVI ZF Test Method Units 22 32 46 68
ISO Viscosity Grade ISO 3448 22 32 46 68
Density @ 15 0C ASTM D 4052 gm/cc 0.86 0.870 0.870 0.875
Viscosity @ 40 0C ASTM D 445 cSt 22.9 32.4 46.8 68.9
Viscosity @ 100 0C ASTM D 445 cSt 5.3 7.10 9.76 13.4
Viscosity Index ASTM D 2270 175 190 200 200
Pour Point ASTM D 97 °C -36 -36 -36 -36
Flash Point (COC) ASTM D 92 °C 204 215 215 220
Copper Strip Corrosion ASTM D 130 1B 1B 1B 1B
Foam Seq I,II,III ASTM D 892 ml/ml 10/0 10/0 10/0 10/0
Demulsibility, 40/40/0 ASTM D 1401 min 10 10 10 10
TAN, mg KOH/g ASTM D 2896 0.4 0.4 0.4 0.4

The above figures are typical of blends with normal production tolerance and do not constitute a specification.

You May Also Like